V46

V46

Specifically made for commercial kitchens, the V46 vertical fan features individually designed and manufactured impellers that provide maximum airflow at high pressure levels. The fan also complies with EPA requirements, including low pollution and vertical exhaust configuration.

Download Brochure

Product Sheet

Technical Data

Model Number	Fan Speed Rev/min	KW	Amps +or-10%	Volts	Noise Level (dBA)*	Motor Shaft mm	IP Rating
V46-376-SP	900	0.37	2.50	240	53	16	44
V46-376-3P	900	0.37	1.26	415	53	19	55
V46-374-SP**	1400	0.37	2.30	240	63	16	44
V46-374-3P	1400	0.37	1.05	415	63	14	55
V46-556-3P	900	0.55	1.70	415	54	19	55
V46-554-SP	1400	0.55-0.75	4.30	240	64	16	44
V46-554-3P	1400	0.55	1.37	415	64	19	55
V46-756-SP	900	0.75	4.70	240	55	16	44
V46-756-3P	900	0.75	1.92	415	55	24	55
V46-754-SP	1400	0.75	4.30	240	66	16	44
V46-754-3P	1400	0.75	1.61	415	66	19	55
V46-114-3P	1400	1.1	2.37	415	70	24	55
V46-154-3P	1400	1.5	3.20	415	72	24	55

* Approx noise level @ 3 meters (dBA)

** Variable speed controllable with Variable Speed Switch (VSS)

Energy Efficiency, NCC/BCA Vol. 1, Section J compliant + 2019

NOTE: All fans may be controlled with a Cyclo Variable Speed Drive or other control switches. We recommend all speed control units and switches to be used only with products supplied by Cyclo Fans.

Performance Data

Dimensions

Section	Dimensions (mm)
A	845
B	610
C	130
D	40
E	460
F	525

Specifications

Typical Industries & Applications :

Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options

Description	Vertical Exhaust Fan
Model	V46
Internal Flange Diameter	460 mm
Fixing	Vertical, Roof Mounted
Features	High performing, robust and light weight Locally owned and manufactured in Melbourne (Australia) since 1947 EPA Compliant, Australian & NZ Standards Compliant
Impeller	Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure Hand crafted and balanced Aluminium alloy Mixed flow type impellers (axial flow and centrifugal design)
Enclosure	Galvanized steel casing and waste resistant motor enclosures Motor mounted outside airstream Supplied with associated flanges
Motor	Typical Regal, Typical WEG
Phase(s)	Single Phase & Three Phase
Custom Motors	Hazard Area Motors – Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
Circuit Breaker	Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply. Circuit breaker overload should be set to suit motor’s amp draw.
Control Options	5A Variable Speed Switch (Available) 2 Speed Switch (N/A) Cyclo VSD Plug-Ins (Available) (Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
Weight	40 – 45kg
Installation	Fan Unit: Roof Plumber, Canopy Maintenance / Installer Electrical Connections: Licensed electrician
Transport	Top load only Ensure impeller has not been exposed to wet weather, any water inside the motor housing can damage the motor.