V53

V53

The V53 vertical exhaust fan is an Australian made fan that’s designed for commercial kitchen exhaust applications. Featuring individually designed and manufactured impellers for maximum airflow at high pressure levels, this fan is able to provide high pressure characteristics over a variety of flows. As a result, lower speeds can be used for reduced noise levels.

Download Brochure

Product Sheet

Technical Data

Model Number	Fan Speed Rev/min	KW	Amps +or-10%	Volts	Noise Level (dBA)*	Motor Shaft mm	IP Rating
V53-756-SP	900	0.75	4.70	240	55	16	44
V53-756-3P	900	0.75	2.07	415	55	24	55
V53-754-SP	1400	0.75	4.30	240	68	16	44
V53-754-3P	1400	0.75	1.79	415	68	19	55
V53-116-3P	900	1.10	3.38	415	58	24	55
V53-114-3P	1400	1.10	2.43	415	70	24	55
V53-156-3P	900	1.50	3.70	415	59	28	55
V53-154-3P	1400	1.50	3.20	415	72	24	55
V53-226-3P	900	2.20	5.2	415	60	28	55
V53-224-3P	1400	2.20	4.70	415	73	28	55
V53-404-3P	1400	4.0	8.25	415	74	28	55

* Approx noise level @ 3 meters (dBA)

** Variable speed controllable with Variable Speed Switch (VSS)

Energy Efficiency, NCC/BCA Vol. 1, Section J Compliant + 2019

NOTE: All fans may be controlled with a Cyclo Variable Speed Drive or other control switches. We recommend all speed control units and switches to be used only with products supplied by Cyclo Fans.

Performance Data

Dimensions

Section	Dimensions (mm)
A	940
B	705
C	135
D	45
E	540
F	595

Specifications

Typical Industries & Applications :

Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options

Description	Vertical Exhaust Fan
Model	V53
Internal Flange Diameter	530 mm
Fixing	Vertical, Roof Mounted
Features	High performing, robust and light weight Locally owned and manufactured in Melbourne (Australia) since 1947 EPA Compliant, Australian & NZ Standards Compliant
Impeller	Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure Hand crafted and balanced Aluminium alloy Mixed flow type impellers (axial flow and centrifugal design)
Enclosure	Galvanized steel casing and waste resistant motor enclosures Motor mounted outside airstream Supplied with associated flanges
Motor	Typical Regal, Typical WEG
Phase(s)	Single Phase & Three Phase
Custom Motors	Hazard Area Motors – Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
Circuit Breaker	Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply. Circuit breaker overload should be set to suit motor’s amp draw.
Control Options	5A Variable Speed Switch (N/A) 2 Speed Switch (Available) Cyclo VSD (Available) (Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
Weight	70 – 90kg
Installation	Fan Unit: Roof Plumber, Canopy Maintenance / Installer Electrical Connections: Licensed electrician
Transport	Top load only Ensure impeller has not been exposed to wet weather, any water inside the motor housing can damage the motor.